Ballistic Breaching Explained

How a 12-gauge breaching round defeats a door, and when tactical teams reach for one instead of a ram or an explosive charge.

What is ballistic breaching?

Ballistic breaching is the use of a purpose-built shotgun round to destroy a door's locking hardware, so an entry team can move through the opening immediately. It is one of three broad approaches to forced entry, alongside mechanical breaching with rams and pry tools, and explosive breaching with shaped charges.

The round is fired at contact or near-contact distance, with the muzzle placed against the lock or hinge. Rounds built for this job are designed to spend their energy on the hardware rather than carry through the doorway, which is what separates a breaching round from ordinary buckshot or a hunting slug.

Where the round goes: locks and hinges

There are two targets on a door, and which one a team chooses depends on how the door is built and which way it swings. Officers assess the lock and the hinges beforehand where possible, often with advance knowledge of the building. The objective is a single round per hinge or lock, with the muzzle at the correct position and angle, so the hardware is removed with minimal shots.

Door construction drives the decision. A hollow interior door in a wooden frame behaves very differently from a commercial steel door hung in a steel frame, and heavier commercial doors may call for a different method entirely.

Officer breaching a door hinge with a T.E.A.R. round fired from a 12-gauge shotgun

Frangible rounds and rifled slugs

Two projectile types show up in this space, and they do very different jobs. A frangible round is made of compressed material that breaks apart on impact. It transfers its energy into the lock or hinge and then loses coherence, which sharply limits what continues into the room beyond. A rifled slug is a solid projectile that retains its mass on impact, carrying energy deep into a dense target instead of shedding it at the surface.

Frangible rounds are the standard choice for door breaching in occupied structures. Rifled slugs are not door tools at all: their job is penetration into dense targets such as an engine block, to disable a vehicle.

Ballistic, mechanical, or explosive?

Each method has a place, and each has real limits.

MethodSpeedStandoffBest suited toTrade-offs
BallisticImmediateNone; contact placementInterior and exterior doors, and multiple doors in sequenceRequires a trained breacher, typically with a dedicated breaching shotgun
MechanicalSlowNoneSituations where no ordnance is acceptableTools are cumbersome and time-consuming, especially across several doors
ExplosiveFast at the point of useRequired; the team moves back, then rushes inHeavy or fortified doorsPlanning, standoff distance, and handling burden

Ballistic breaching tends to win on versatility. It is immediate, it needs no standoff, and one breacher can work several doors in a row, which is why it is common for interior doors in hotels, commercial buildings, and multi-room residences.

Overpenetration and bystander safety

The safety case for a frangible breaching round rests on what does not happen. Hostages or bystanders may be immediately behind the door, so a round that defeats the hardware and then breaks up is doing two jobs at once.

A well-designed breaching round is selective about what it penetrates. The T.E.A.R. round, for example, will defeat a 14-gauge steel plate yet will not pierce Level IIIA (HG2) soft body armor even at point-blank range. Operators also report no significant blowback when firing at close range, which reduces the chance of material returning toward the breacher.

Training

Many tactical teams are already familiar with ballistic breaching, but specialized agencies and organizations offer dedicated breaching courses for teams new to it. These cover placement technique, safety measures, and best practice. Some breaching rounds also carry UV-reactive material, which shows where shots landed and how effectively they penetrated, making after-action review and training feedback far more concrete.

Integral Hitch breaching rounds

Integral Hitch builds three 12-gauge rounds for forced entry and vehicle stopping.

T.E.A.R. Round

Tactical Entry Assault Round. A 40-gram frangible, lead-free load in a 2¾-inch 12-gauge cartridge, with a waterproof sealed cap. In federal service since 1995.

See the T.E.A.R. round

Snub Round

A 24-gram round in a 1.70-inch 12-gauge cartridge, sized for compact shotguns that can't run a full-length shell.

HITS Round

A 33.4-gram rifled slug in a 2.75-inch 12-gauge cartridge, built to disable internal combustion engines.

See it on a door

Demo kits are available to qualified agencies, along with references from top federal agencies.

Request a demo kit

Integral Hitch products are sold only to law enforcement, U.S. military, and authorized government purchasers. They are not available to the general public.